1.8 times or 5.4V/m
Ron Chernus
Antonio Cinquino <cinqu...@cae.ca> on 09/06/2000 08:33:47 AM
Please respond to Antonio Cinquino <cinqu...@cae.ca>
To: "'emc-p...@majordomo.ieee.org'" <emc-p...@majordomo.ieee.org>
cc: (bcc: RON CHERNUS/LALAB)
Subject: Immunity Testing to EN55024
Hello Group,
Table 1 of EN55024 calls for a test specification of 3 V/m
(umodulated, r.m.s) radio-frequecny EM field for Immunity at the enclosure
port.
Does anyone know off-hand the value when the signal is 80%
modulated
with an AM signal of 1kHz as called for in the same table?
Antonio Cinquino
CAE Electronics Ltd.
Electrical System Designer
Phone : (514) 341-2000 (ext. 4303)
Fax : (514) 340-5552
Email : cinqu...@cae.ca <mailto:cinqu...@cae.ca>
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
To cancel your subscription, send mail to:
majord...@ieee.org
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Jim Bacher: jim_bac...@mail.monarch.com
Michael Garretson: pstc_ad...@garretson.org
For policy questions, send mail to:
Richard Nute: ri...@ieee.org
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
To cancel your subscription, send mail to:
majord...@ieee.org
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Jim Bacher: jim_bac...@mail.monarch.com
Michael Garretson: pstc_ad...@garretson.org
For policy questions, send mail to:
Richard Nute: ri...@ieee.org
