Ladies and Gents, I have a pentium mother board that I need to CE mark. The board is equipped with an RS-232 and a parallel port. The standards that I will be following are EN50081-1 or EN55024 and EN55022. For immunity testing do I need to test the PC's AC line? Do I also have to test the PC's ports and accessories, or is it sufficient to test the additional ports that the board introduces? In addition how do I test the RS-232 port for example?
Thanks in advance, William D'Orazio CAE Electronics Ltd. Electrical System Designer Phone: (514) 341-2000 (X4555) Fax: (514)340-5552 Email: dora...@cae.ca ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Jim Bacher: jim_bac...@mail.monarch.com Michael Garretson: pstc_ad...@garretson.org For policy questions, send mail to: Richard Nute: ri...@ieee.org