Hi All, Here is some light reading if you are looking for a way to pass a hot day (it is 109 degrees here in Los Gatos today!)
Often, a probe ground lead is thought of as a source of error in a measurement. But, the ground lead can also increase measurement accuracy. I have posted a supplemental Technical Tidbit for June at www.dsmith.org on probe ground leads. It located at the bottom of the index page just below the main Technical Tidbit for June on 180 degree combiners. Doug -- ----------------------------------------------------------- ___ _ Doug Smith \ / ) P.O. Box 1457 ========= Los Gatos, CA 95031-1457 _ / \ / \ _ TEL/FAX: 408-356-4186/358-3799 / /\ \ ] / /\ \ Mobile: 408-858-4528 | q-----( ) | o | Email: d...@dsmith.org \ _ / ] \ _ / Website: http://www.dsmith.org ----------------------------------------------------------- ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Jim Bacher: jim_bac...@mail.monarch.com Michael Garretson: pstc_ad...@garretson.org For policy questions, send mail to: Richard Nute: ri...@ieee.org