1. Regarding the Safety Standard for Power Transformers, I think that the EN 61558-1:1998 is more appropriate; it supersedes the EN60742.
2. In regard to the EMC Standards, I will suggest you to have a look at http://www.schaffner.com/filters/pdffiles/1phase_filter_cat.pdf (page 5 of 63) and there are information which I hope will offer the necessary understanding of the applicable Standards. OBS.: In my opinion, I think that you have to be very attentive in regard to the applicable END PRODUCT ELECTRICAL SAFETY STANDARD requirements (e.g.: Leakage Current at the maximum Frequency and Voltage, Electric Strength Test, Insulation Resistance, etc.) Respectfully yours, Constantin Constantin Bolintineanu, P.Eng Senior Safety Engineer DIGITAL SECURITY CONTROLS LTD. 3301 LANGSTAFF Rd. CONCORD, ONTARIO, CANADA, L4K 4L2 Phone: 1-905 760 3000 extension 2568 Fax: 1-905 760 3020 APPROVAL SERVICES E-mail: [email protected] -----Original Message----- From: [email protected] [mailto:[email protected]] Sent: Monday, May 08, 2000 7:17 AM To: emc-pstc Subject: a common-mode choked coil Hello Group, I understand that I should have a power transformer for Europe complied with IEC(EN)742. well then, What standards should I have a common-mode choked coil (radio interference filter) for Europe complied with? Thanks in advance Jun Nakamura SYSTEM&NEW BUSINESS PROMOTING DEPT. MELCO,Japan [email protected] ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Jim Bacher: [email protected] Michael Garretson: [email protected] For policy questions, send mail to: Richard Nute: [email protected] ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Jim Bacher: [email protected] Michael Garretson: [email protected] For policy questions, send mail to: Richard Nute: [email protected]
