Kevin, While CCTV does appear to fall under the scope of IEC65, an argument can be made that it also falls under the scope of IEC950. CENELEC (TC79) published a "Guide to achieving compliance with EC directives for alarm systems (Report R079-001:1996)". In table 4, CCTV is linked to the LVD, and the published opinion is "The standard EN 60950 shall apply for all equipment used in alarm systems and covered by the directive as mentioned in table 1(table 1 is the scope of the LVD)".
James Goedderz Sensormatic > ---------- > From: Kevin Newland[SMTP:[email protected]] > Reply To: Kevin Newland > Sent: Friday, March 10, 2000 11:02 AM > To: Peter Merguerian; [email protected] > Subject: Re: CCTV CAMERA to LVD > > > > Peter, > > I am afraid I disagree with Richard. The CCTV comes > under the scope of IEC65 and not 950. > > Thanks > Kevin > --- Peter Merguerian <[email protected]> wrote: > > > > Hello Group, > > > > Can EN 60 950 be used to evaluate a CCTV camera to > > the LVD? > > Peter Merguerian > > Managing Director > > Product Testing Division > > I.T.L. (Product Testing) Ltd. > > Hacharoshet 26, POB 211 > > Or Yehuda 60251, Israel > > > > Tel: 972-3-5339022 Fax: 972-3-5339019 > > e-mail: [email protected] > > website: http://www.itl.co.il > > > > > > > > > > > > > > ------------------------------------------- > > This message is from the IEEE EMC Society Product > > Safety > > Technical Committee emc-pstc discussion list. > > > > To cancel your subscription, send mail to: > > [email protected] > > with the single line: > > unsubscribe emc-pstc > > > > For help, send mail to the list administrators: > > Jim Bacher: > > [email protected] > > Michael Garretson: > > [email protected] > > > > For policy questions, send mail to: > > Richard Nute: [email protected] > > > > > > > __________________________________________________ > Do You Yahoo!? > Talk to your friends online with Yahoo! Messenger. > http://im.yahoo.com > > ------------------------------------------- > This message is from the IEEE EMC Society Product Safety > Technical Committee emc-pstc discussion list. > > To cancel your subscription, send mail to: > [email protected] > with the single line: > unsubscribe emc-pstc > > For help, send mail to the list administrators: > Jim Bacher: [email protected] > Michael Garretson: [email protected] > > For policy questions, send mail to: > Richard Nute: [email protected] > > ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Jim Bacher: [email protected] Michael Garretson: [email protected] For policy questions, send mail to: Richard Nute: [email protected]
