At 11:08 03/09/2000 -0800, you wrote: >There is a similar standard: > >IEEE Standard 299 "Standard Method of Measuring the Effectiveness of the Electromagnetic Shielding Enclosures", >Approved March 11, 1991 by IEEE Standard Board, >Approved July 26, 1991 by American National Standards Institute (ANSI). >
The current version is IEEE299-1997. Please use this version since it differs substantially from the earlier 1991 version. This is the version that was evaluated by the military in favor of which MIL STD 285 was abolished. The 1997 version is a substantial improvement over IEEE299-1991, both technical and in flexibility. The old version mandates an extensive number of tests, making testing prohibitively expensive (or lucrative for the shield room testers). These mandatory requirements have been abandoned in favor of a more flexible suggested test procedure with frequencies and tests performed "as needed" for the application of the shielded room. Regards, -Robert Robert Bonsen Principal Consultant Orion Scientific email: rbon...@orionscientific.com URL: http://www.orionscientific.com phone: (512) 347 7393; FAX: (512) 328 9240 ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Jim Bacher: jim_bac...@mail.monarch.com Michael Garretson: pstc_ad...@garretson.org For policy questions, send mail to: Richard Nute: ri...@ieee.org