Require symbol IEC 60417 symbol 5019 at :http://w3.hike.te.chiba-u.ac.jp/iec417/ver2.0/html/index.html
-----Original Message----- From: James, Chris [mailto:[email protected]] Sent: Tuesday, January 18, 2000 3:54 PM To: '[email protected]'; Jackson; William; '[email protected]' Subject: RE: Proper Protective Earth Ground Symbol For CE LVD: The main earth point should be marked with the circled upside down tree. Only one such symbol should appear on your product. This is your main earth bond point. Any other points you wish to mark as earth should be marked with the uncircled variety of the upside down tree. Refer EN 60065 for symbol - tree is not solid but formed with horizontal lines of decreasing length. Regards, Chris -----Original Message----- From: [email protected] [mailto:[email protected]] Sent: Tuesday, January 18, 2000 1:18 PM To: Jackson; William; '[email protected]' Subject: Re:Proper Protective Earth Ground Symbol forwarded for William.... Jim ____________________Reply Separator____________________ Subject: Proper Protective Earth Ground Symbol Author: "Jackson; William" <[email protected]> List-Post: [email protected] Date: 01/14/00 4:59 PM Greetings all, I have a request for interpretation of requirement. Which symbol is correct for use on a chassis for protective earthing - the upside down tree or the circle upside down tree or the pitchfork?? (Note:- the ground on the back of the box is generally marked "GND" and is screw and locking washer configuration). What is the correct marking to satisfy a NRTL for a marking? Thanks, Bill Bill Jackson, CQE QA Prgms&Eng/Product Safety Harris RF Communications Division (RCD) (716)-242-3897 [email protected] --------- This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to [email protected] with the single line: "unsubscribe emc-pstc" (without the quotes). For help, send mail to [email protected], [email protected], [email protected], or [email protected] (the list administrators). --------- This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to [email protected] with the single line: "unsubscribe emc-pstc" (without the quotes). For help, send mail to [email protected], [email protected], [email protected], or [email protected] (the list administrators). --------- This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to [email protected] with the single line: "unsubscribe emc-pstc" (without the quotes). For help, send mail to [email protected], [email protected], [email protected], or [email protected] (the list administrators).
