I read in !emc-pstc that J.Feldhaar <j.feldh...@telejet.de> wrote (in <3c0672ab.afbfd...@telejet.de>) about 'EMI receiver desensitization and amplitude overhead', on Thu, 29 Nov 2001:
>I am looking for a URL or graphic that shows the headroom necessary for >correct QP emi measurements using an EMI receiver. > >If my information is correct, there must be up to 43.5 dB in excess of >the measurement range for measuring Quasipeak signals correctly, >decreasing when pulse frequency approaches 1 KHz. Your information is correct, but there is much more. > >I am looking for a source of information or a picture of this graphic. >Note: There are three curves, one each for 200 Hz, 9 KHz and 120 KHz >resolution bandwidth. The information you need is in CISPR 16-1:1999, Tables 1 and 2, clause 4.1.4 and Annex A, and Figure 1. There is far too much to be copied to you. You need either to buy the standard (from http://www.iec.ch) or the DIN equivalent, or find it in a library. -- Regards, John Woodgate, OOO - Own Opinions Only. http://www.jmwa.demon.co.uk After swimming across the Hellespont, I felt like a Hero. ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: pstc_ad...@garretson.org Dave Heald davehe...@mediaone.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server.