I believe it is 2000-2700V and about 7-10A the value has increased from
1700V and 6A because some prisoners did not die.

Regards,

Jorge Sarellano
TUV PRODUCT SERVICE
Compliance Engineer
Phone 408-919-3744
Fax 408-919-0585

Have you visited http://www.tuvam.com lately?

-----Original Message-----
From: dan.kin...@heapg.com [mailto:dan.kin...@heapg.com]
Sent: Tuesday, November 13, 2001 1:56 PM
To: Rich Nute; gkerv...@eu-link.com
Cc: jrbar...@lexmark.com; emc-p...@majordomo.ieee.org
Subject: RE: Define Continuous DC Voltage



Does anyone know what voltage is used in electric chairs?  Just Curious.
Dan Kinney
Horner APG
Indianapolis

> -----Original Message-----
> From: Rich Nute [SMTP:ri...@sdd.hp.com]
> Sent: Tuesday, November 13, 2001 2:08 PM
> To:   gkerv...@eu-link.com
> Cc:   jrbar...@lexmark.com; emc-p...@majordomo.ieee.org
> Subject:      Re: Define Continuous DC Voltage
> 
> 
> 
> 
> 
> Hi Gregg:
> 
> 
> >   There was also a very good (but short) article by Tektronix in the
> 70's
> >   called The Lethal Current.
> >   
> >   It concluded that currents between 100 mA and 3 Amps were more lethal
> that
> >   currents of more than 3 Amps because those high currents tended to
> 'restart'
> >   the heart.
> 
> Hmm.  Having been the manager of product safety at Tektronix in 
> the '70's, I don't recall such an article.  At least not by that
> name.
> 
> Electric energy causes various injuries to the body depending 
> on the magnitude of the energy.  Only two of the injuries can 
> lead to a fatality.
> 
> The two injuries are fibrillation of the heart, and overheating 
> of internal organs, especially the liver.
> 
> Fibrillation is caused by ac current in the range of 50 mA to
> 500 mA (external connections) where the current pathway through 
> the body includes the chest (and the heart).  Above 500 mA, 
> fibrillation is not a likely consequence.  (And, I believe I
> am correct in asserting that dc cannot cause fibrillation.)
> 
> Overheating of internal organs is a function of power dissipated
> in the body, where the body impedance can be taken as 1000 ohms.
> The power required depends on the time of contact.  Electric
> utility linemen are subject to such injury.  Consider 1 ampere
> through 1000 ohms is 1000 watts!  (The electric chair kills by
> over-heating the internal organs, not by fibrillation.)
> 
> So, Gregg's statement that there is both a lower and upper limit 
> for fibrillation is correct (although I do not agree with Gregg's 
> values).
> 
> 
> Best regards,
> Rich
> 
> 
> 
> 
> 
> 
> -------------------------------------------
> This message is from the IEEE EMC Society Product Safety
> Technical Committee emc-pstc discussion list.
> 
> Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/
> 
> To cancel your subscription, send mail to:
>      majord...@ieee.org
> with the single line:
>      unsubscribe emc-pstc
> 
> For help, send mail to the list administrators:
>      Michael Garretson:        pstc_ad...@garretson.org
>      Dave Heald                davehe...@mediaone.net
> 
> For policy questions, send mail to:
>      Richard Nute:           ri...@ieee.org
>      Jim Bacher:             j.bac...@ieee.org
> 
> All emc-pstc postings are archived and searchable on the web at:
>     No longer online until our new server is brought online and the old
> messages are imported into the new server.

-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/

To cancel your subscription, send mail to:
     majord...@ieee.org
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Michael Garretson:        pstc_ad...@garretson.org
     Dave Heald                davehe...@mediaone.net

For policy questions, send mail to:
     Richard Nute:           ri...@ieee.org
     Jim Bacher:             j.bac...@ieee.org

All emc-pstc postings are archived and searchable on the web at:
    No longer online until our new server is brought online and the old
messages are imported into the new server.

Reply via email to