It private branding of equipment A to become B is the issue, then there is no issue. The FCC ID belongs to the manufacturer of A and no change of the Grant is required. A new Grant would be required if the equipment were manufacturered by someone else.
Richard Woods Sensormatic Electronics Tyco International -----Original Message----- From: John Juhasz [mailto:jjuh...@fiberoptions.com] Sent: Tuesday, November 06, 2001 12:35 PM To: 'Don Rhodes'; 'Jong Ho,Lee'; EMC-PSTC; EMC-PSTC Subject: RE: Varient Model on Fcc. I think what the question is here is not so much as 'Class' of emission levels I think he is refering to an OEM product. He is buying completed/fully-functional product A and will market it as product B. They are one in the same. His question is whether he can use (transfer) the FCC ID issued to product A on the marketed product B. I would like to know the same . . . John Juhasz Fiber Options Bohemia, NY -----Original Message----- From: Don Rhodes [mailto:don.rho...@infocus.com] Sent: Tuesday, November 06, 2001 11:23 AM To: 'Jong Ho,Lee'; EMC-PSTC; EMC-PSTC Subject: RE: Varient Model on Fcc. Tommy, I'm not exactly sure what you're asking. If you're asking if a Product which is labeled as Class A can be relabeled as a Class B product because they look the same, the answer is no. The product must be properly retested to assure its compliance with the Class B limits and then you must have a test report approved by the FCC. I have little doubt that if the two really were the same they would be labeled differently. Secondly, the FCC ID is a means of identifying the manufacturer. Therefore, unless your company is the holder of the FCC ID in question, I suggest you ask the printer manufacturer the question you're posing to the group. Respectfully, Don Rhodes EMC Engineering InFocus Corp. -----Original Message----- From: Jong Ho,Lee [mailto:upu...@samsung.com] Sent: Monday, November 05, 2001 8:50 PM To: EMC-PSTC; EMC-PSTC Subject: Varient Model on Fcc. Hi folk. A model has Fcc ID.It is Printer. Our buyer sale A model product to maket as B . There are not differnt between A and B. So I will use same Fcc ID on buyer model. Is it possible? If not,How can I do for get Fcc ID ? Best regards. Tommy ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: pstc_ad...@garretson.org Dave Heald davehe...@mediaone.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server. ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: pstc_ad...@garretson.org Dave Heald davehe...@mediaone.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server.. ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: pstc_ad...@garretson.org Dave Heald davehe...@mediaone.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server. ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: pstc_ad...@garretson.org Dave Heald davehe...@mediaone.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server.