Also check out ETSI EN 300 440-1 (short range devices) and other ETSI standards for above 1 GHz. You can download them for free from the ETSI web site. The test site and test methods are described.
Richard Woods Sensormatic Electronics -----Original Message----- From: WOODS, RICHARD Sent: Tuesday, October 23, 2001 1:24 PM To: emc-p...@majordomo.ieee.org Subject: RE: EMC testing above 1GHz CISPR 16.1 specifies the parameters of the meaurement receiver but does not specify a measurement site above 1 GHz. CISPR 16.2 has the test methods up to 18 GHz. A quick glance at 16.2 did not find any special requirements different from measuring below 1 GHz except that a horn antenna is recommended and the antenna substution method is described along with other standard methods. ANSI C63.4 says there are no site validation requirements above 1 GHz, but a site suitable for use below 1GHz is considered OK for use above 1 Ghz. Richard Woods Sensormatic Electronics -----Original Message----- From: cecil.gitt...@kodak.com [mailto:cecil.gitt...@kodak.com] Sent: Tuesday, October 23, 2001 12:36 PM To: emc-p...@majordomo.ieee.org Subject: EMC testing above 1GHz Importance: High From: Cecil A. Gittens What are the EMC requirements for testing above 1 GHz in an Open Area test site? Cecil ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: pstc_ad...@garretson.org Dave Heald davehe...@mediaone.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server. ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: pstc_ad...@garretson.org Dave Heald davehe...@mediaone.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server.