We have recently purchased an Amplifier Research Model 25SIG4A and we use
an
AR FP2080 probe. We have two antennas for that range, a Schaffner bilog and
an
A. H. Systems horn.

Other than the upcoming 60601-1-2 for medical equipment, are there any
other upcoming
standards that call out immunity testing over a gig? To my knowledge no
present standard
does.

Bob Heller
3M Product Safety, 76-1-01
St. Paul, MN 55107-1208
Tel:  651- 778-6336
Fax:  651-778-6252

==============================================================================


                                                                                
                                     
                    UMBDENSTOCK@Senso                                           
                                     
                    rmatic.com             To:     emc-p...@majordomo.ieee.org  
                                     
                                           cc:     (bcc: Robert E. 
Heller/US-Corporate/3M/US)                        
                    09/05/2001 10:19       Subject:     Power Amplifier for 2 
GHz Immunity                           
                    AM                                                          
                                     
                    Please respond to                                           
                                     
                    UMBDENSTOCK                                                 
                                     
                                                                                
                                     
                                                                                
                                     






Hello Forum,

I was wondering what amplifier you are using for the 2 GHz testing
requirement of EN61000-4-3?  Any comments regarding "if I had to do it over
again, I would have . . . " relative to your 2 GHz setup?

Best regards,

Don Umbdenstock

Sensormatic



-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/

To cancel your subscription, send mail to:
     majord...@ieee.org
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Michael Garretson:        pstc_ad...@garretson.org
     Dave Heald                davehe...@mediaone.net

For policy questions, send mail to:
     Richard Nute:           ri...@ieee.org
     Jim Bacher:             j.bac...@ieee.org

All emc-pstc postings are archived and searchable on the web at:
    No longer online until our new server is brought online and the old
messages are imported into the new server.





-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/

To cancel your subscription, send mail to:
     majord...@ieee.org
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Michael Garretson:        pstc_ad...@garretson.org
     Dave Heald                davehe...@mediaone.net

For policy questions, send mail to:
     Richard Nute:           ri...@ieee.org
     Jim Bacher:             j.bac...@ieee.org

All emc-pstc postings are archived and searchable on the web at:
    No longer online until our new server is brought online and the old 
messages are imported into the new server.

Reply via email to