I have a medical application that requires "double insulation" from the Mains to an "applied part" according to IEC60601. IEC60601 states that for a reference voltage of 250v and double insulation, the test voltage is 4000v for 1 min. I am assuming that the voltages are RMS values.
How does one go about meeting the 4000v test when the highest rated ac-dc converter I can find is 3500v RMS continuous. Any help is appreciated. Thanks. Ronald Cyprowski Vascor Inc. 566 Alpha Drive Pittsburgh PA 15238 412-963-7438 x139 r...@vascor.com ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: pstc_ad...@garretson.org Dave Heald davehe...@mediaone.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server.
