Hi Lyons,
Up to this point, Poland is still not a Membership of the EU. They will be
the first wave candidate coutry to apply for EU Membership by the end of
year 2001??.
Placing on the Poland market the telecommunication equipment requiring
mandatory conformity assessment with the essential requirements and without
the required mark of conformity with the essential requirements is
prohibited according to Ludomir Nowak (Head of Terminal Equipment Test
Laboratory in Poland). Ludomir Nowak can be contacted as the following
address.
Ludomir Nowak
Head of Terminal Equipment Test Laboratory
Phone: (+4822) 5128173, Fax: (+4825) 5128146
Email: l.mo...@itl.waw.pl
For safety, the Polish Standard PN-93/T-42107, being the Polish translation
of IEC 60950 was applied. The test reports and certificates of conformity
iwth IEC 60950 or EN 60950/EN 41003 issued by accredited European
laboratories were regonized in the homologation procedure.
For EMC a mumber of European standards ahve translated into Polish, getting
PN-EN symbol in the standard denotation. Foreign certificates of conformity
with the corresponding original standards were also accepted during
homologation procedure.
Hope the above information will be usefull to you.
Good luck!
Richard Lee
Compliance Engineer
------------------------------------------------------------------
Terawave Communications, Inc.
30680 Huntwood, Ave.
Hayward, CA 94544
Tel: 510-401-6590 Fax: 510-401-6628
www.terawave.com
-----Original Message-----
From: Lyons, Jim [mailto:jim.ly...@gtech.com]
Sent: Thursday, June 07, 2001 7:59 AM
To: 'emc-p...@ieee.org'
Subject: Poland and CE and Harmonics
I need to know the following:
1) Does Poland require or accept a CE declaration for safety, EMC and
telecom, either now or in the foreseeable future?
2) Does Poland have a requirement for power line harmonics (i.e.
EN61000-3-2)?
Thanks for any help on this.
Jim
James W. Lyons
Manager - Product Compliance
GTECH Corp.
55 Technology Way
West Greenwich, RI 02817
Tel (401) 392-7723
Fax (401) 392-4955
Email jim.ly...@gtech.com
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
majord...@ieee.org
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Michael Garretson: pstc_ad...@garretson.org
Dave Heald davehe...@mediaone.net
For policy questions, send mail to:
Richard Nute: ri...@ieee.org
Jim Bacher: j.bac...@ieee.org
All emc-pstc postings are archived and searchable on the web at:
http://www.rcic.com/ click on "Virtual Conference Hall,"
