To all who have worked with ETS 300 019-2-4:1994 (Specification of environmental tests Stationary use at non-weather protected location).
I need to define operating temperature range for an outdoor unit (not solar protected and heat radiation). In paragraph 3.2 Table 2 , under Characteristic severity a high temperature of 45 deg.C being define, but under Test severity 60 deg.C. 1. In Safety Report and unit specification sheet, what should be the minimum temperature marked, 45 deg.C or 60 deg.C ?(what is the temperature that Heating test results should be evaluated to?) Zohar (Jana) Zosmanovich Compliance Engineer, RADWIN ltd. 34 Habarzel St., Tel Aviv 69710, Israel Tel.: 972-3-7666735 ; Fax: 972-3-7657535 Email: <mailto:zohar_zosmanov...@radwin.com> ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: pstc_ad...@garretson.org Dave Heald davehe...@mediaone.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://www.rcic.com/ click on "Virtual Conference Hall,"
