I believe wire gauge might be an issue as well. Bill Fleury
-----Original Message----- From: Russell, Ray [mailto:ray_russ...@gastmfg.com] Sent: Wednesday, May 02, 2001 6:46 AM To: 'Cameron O'phee'; 'EMC - PSTC Forum' Subject: RE: Australian power cable requirements. Cameron, I had a similar situation some time ago with an internal cable and it had to do with the insulation thickness. The SJT cord was only rated 300V, and the insulation thickness did not meet the European standard. We changed to a 600V cord, which was accepted. Ray Russell r...@gastmfg.com -----Original Message----- From: Cameron O'phee [mailto:O'p...@ali.com.au] Sent: Tuesday, May 01, 2001 8:23 PM To: 'EMC - PSTC Forum' Subject: Australian power cable requirements. Hi All, I have a situation where the test house I normally use for safety will accept SJT cordage for an internal power cable but a different test house will not. The power cable conducts 240v from one power supply to another, with both supplies internal to the machine. The second test house insists that the cordage must be H05VVF. Consequentely, I would like to know the difference in requirements between the US SJT cordage and European H05VVF. Regards, Cameron O'Phee. EMC & Safety Precompliance. Aristocrat Technologies Australia. Telephone : +61 2 9697 4420 Facsimile : +61 2 9663 1412 Mobile : 0418 464 016 ---------------------- CONFIDENTIALITY NOTICE ---------------------- This email is intended only to be read or used by the addressee. The information contained in this e-mail message may be confidential information. If you are not the intended recipient, any use, interference with, distribution, disclosure or copying of this material is unauthorised and prohibited. Confidentiality attached to this communication is not waived or lost by reason of the mistaken delivery to you. If you have received this message in error, please delete it and notify us by return e-mail or telephone Aristocrat Technologies Australia Pty Limited on +61 2 9413 6300. ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: pstc_ad...@garretson.org Dave Heald davehe...@mediaone.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://www.rcic.com/ click on "Virtual Conference Hall," ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: pstc_ad...@garretson.org Dave Heald davehe...@mediaone.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://www.rcic.com/ click on "Virtual Conference Hall," ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: pstc_ad...@garretson.org Dave Heald davehe...@mediaone.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://www.rcic.com/ click on "Virtual Conference Hall,"
