Hello Group, I just had a question posed to me that made me think a little bit. So I will pose it to all of you. First some preamble. A device is going to be made for the European market. It is in fact a "dummy" device in that it looks like the real thing but it is not. The only electronics inside is a bridge rectifier and a RC circuit to blink a LED. The device can be powered by either an AC or DC source up to 30 V. The power source is not supplied. For this industry (security) there is a product family standard for EMC. The device is not a mock up for store display purposes but is in fact used in the industry to give the impression that there are more of these devices around than there really are.
So the moment has arrived, do you CE mark the device? If you say yes, what directive did you apply? If you say no, what is your reasoning? Best Regards, Kevin Harris Manager, Approval Services Digital Security Controls 3301 Langstaff Road Concord, Ontario CANADA L4K 4L2 Tel: +1 905 760 3000 Ext. 2378 Fax +1 905 760 3020 Email: harr...@dscltd.com <mailto:harr...@dscltd.com> ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: pstc_ad...@garretson.org Dave Heald davehe...@mediaone.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://www.rcic.com/ click on "Virtual Conference Hall,"
