All, Correct me if I'm reading too much into this but I believe that if you read far enough in 15.19 it says that if the device is too small to include the wording that you can simply put the statement in the users manual. Bill Fleury
-----Original Message----- From: Peter Merguerian [mailto:pmerguer...@itl.co.il] Sent: Wednesday, March 14, 2001 11:12 AM To: 'Steve Austin'; emc pstc Cc: Shaike Raz Subject: RE: FCC labels Steve and All, I would assume that if your unit is small enough so as not to be able to have all the wording, you could get an authorization from the FCC. Please confirm. Peter Merguerian Managing Director Product Testing Division I.T.L. (Product Testing) Ltd. Hacharoshet 26, POB 211 Or Yehuda 60251, Israel Tel: 972-3-5339022 Fax: 972-3-5339019 e-mail: pmerguer...@itl.co.il <mailto:pmerguer...@itl.co.ilwebsite:> website: http://www.itl.co.il <http://www.itl.co.il/> TO LEARN ABOUT AUSTRALIAN AND NEW ZEALAND REQUIREMENTS, CONTACT ME AT THE EARLIEST STAGES OF YOUR DESIGN; REQUIREMENTS CAN BE TRICKY! -----Original Message----- From: Steve Austin [mailto:aus...@cassindustries.com] Sent: Wednesday, March 14, 2001 2:27 PM To: emc pstc Subject: FCC labels Using the FCC "verification" procedure for a Class A digital device, does the label on the unit have to contain the complete statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. or will This device complies with part 15 of the FCC Rules. be acceptable. I understand that the following statement must be shown in the documentation supplied with the unit. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense Regards Steve Austin CASS Industries Limited austin @cassindustries.com
