I am thinking if it is possible to connect the source input to the surge tester
to a DC source, instead of the AC source, then you can apply the surge tests to
the DC input of your product.
>>> "Jennifer Banh" <jb...@bb-elec.com> 12/18/01 03:43am >>>
Hello everyone,
I am currently trying to test a product of ours that falls under 50082-1
generic standard for light industrial equipment. Our problem is that we
have a 24VAC power input port. The generic standard calls out for EN
61000-4-5 on AC power input ports. After looking at EN 61000-4-5 it seems
that it is intended for AC mains voltages, but I couldn't find anything that
says a 24VAC input is exempt from this test. I am looking for outside
opinions on whether this test is truly applicable.
Thanks,
Jennifer Banh
BTW, we already tried just testing to the spec, and failed. Any suggestions
on how to protect against this test would also be appreciated.
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
majord...@ieee.org
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Michael Garretson: pstc_ad...@garretson.org
Dave Heald davehe...@mediaone.net
For policy questions, send mail to:
Richard Nute: ri...@ieee.org
Jim Bacher: j.bac...@ieee.org
All emc-pstc postings are archived and searchable on the web at:
No longer online until our new server is brought online and the old
messages are imported into the new server.
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
majord...@ieee.org
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Michael Garretson: pstc_ad...@garretson.org
Dave Heald davehe...@mediaone.net
For policy questions, send mail to:
Richard Nute: ri...@ieee.org
Jim Bacher: j.bac...@ieee.org
All emc-pstc postings are archived and searchable on the web at:
No longer online until our new server is brought online and the old
messages are imported into the new server.
