Terminal Equipment approval has been privatized and is now under the control of 
ACTA. Go to their web page http://www.part68.org and you can down load one copy 
as a freeby of the new ANSI/TIA technical requirements.

David Clement
Sr. Staff Approvals Engineer
Motorola Inc.
Global Homologation Engineering
20 Cabot Blvd.
Mansfield, MA 02048
P: 508-261-4389
F: 508-261-4777
C: 508-725-9689


-----Original Message-----
From: Eric Petitpierre [mailto:eric.petitpie...@pulse.com]
Sent: Wednesday, December 12, 2001 11:27 AM
To: dan.kin...@heapg.com; emc-p...@ieee.org
Subject: Re: internal modem



Dan,

Title 47 of The Code of Federal Regulations, Part 68 is what you are looking 
for.

http://www.gpo.gov/nara/cfr/index.html 

will get you started.  A lot of procedures have changed in recent years,but the 
objectives are still the same ( protection for the network/network personnel)
On a modem, you will want to make sure there is adequate isolation ( HV 
steady-state and impluse),  in- band signal power levels within limits, out of 
band level limits, tariff protection, longitudinal balance, ac and dc impedance 
characteristics.

May initially seem overwhelming but it really isn't.

Regards,
Eric Petitpierre
Pulsecom
Herndon,VA


-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/

To cancel your subscription, send mail to:
     majord...@ieee.org
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Michael Garretson:        pstc_ad...@garretson.org
     Dave Heald                davehe...@mediaone.net

For policy questions, send mail to:
     Richard Nute:           ri...@ieee.org
     Jim Bacher:             j.bac...@ieee.org

All emc-pstc postings are archived and searchable on the web at:
    No longer online until our new server is brought online and the old 
messages are imported into the new server.

-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/

To cancel your subscription, send mail to:
     majord...@ieee.org
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Michael Garretson:        pstc_ad...@garretson.org
     Dave Heald                davehe...@mediaone.net

For policy questions, send mail to:
     Richard Nute:           ri...@ieee.org
     Jim Bacher:             j.bac...@ieee.org

All emc-pstc postings are archived and searchable on the web at:
    No longer online until our new server is brought online and the old 
messages are imported into the new server.

Reply via email to