Reginald,

The criteria is in 47 CFR 2.948 (Part 2 of the FCC rules).  The contact
person was/is Tom Phillips (OET office).  I would recommend contacting him
before undertaking the task and checking out the FCC website for
information, specifically the OET office (Office of Engineering and
Technology).  If I am not mistaken, sites may be registered on-line now.

Michael Peters

-----Original Message-----
From: Reginald Henry [mailto:rhe...@vicon-cctv.com]
Sent: Thursday, June 13, 2002 3:07 PM
To: emc-p...@majordomo.ieee.org
Subject: How to become "self certifying" for FCC (IT equipment)?




Greeting to all !

Does any one know what is required by a manufacture's EMC lab site to become
"self certifying" for FCC Class A or B 
 (IT equipment) ?

Is there an "Official FCC " web site that would "explicitly state" what
would be the necessary criteria/requirement  to  establish such a site ?

(I would like something more tangible than just "word of mouth" !)


Best regards to all,

RH


-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/

To cancel your subscription, send mail to:
     majord...@ieee.org
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Ron Pickard:              emc-p...@hypercom.com
     Dave Heald:               davehe...@attbi.com

For policy questions, send mail to:
     Richard Nute:           ri...@ieee.org
     Jim Bacher:             j.bac...@ieee.org

All emc-pstc postings are archived and searchable on the web at:
    http://ieeepstc.mindcruiser.com/
    Click on "browse" and then "emc-pstc mailing list"

-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/

To cancel your subscription, send mail to:
     majord...@ieee.org
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Ron Pickard:              emc-p...@hypercom.com
     Dave Heald:               davehe...@attbi.com

For policy questions, send mail to:
     Richard Nute:           ri...@ieee.org
     Jim Bacher:             j.bac...@ieee.org

All emc-pstc postings are archived and searchable on the web at:
    http://ieeepstc.mindcruiser.com/
    Click on "browse" and then "emc-pstc mailing list"

Reply via email to