The Australian ACA TS 001 Safety Requirements for Customer Equipment states that customer equipment shall comply with AS/NZS 3260 >From TS 001 " AS/NZS 3260 [4] is closely aligned with IEC 950 [6] and has variations to suit Australian conditions " You should verify that the test house is testing to the deviations and list TS 001 as a reference in the report.
You also have to comply with TS 008 Requirements for Authorized Cabling Products for the Telco Cable "if you are shipping with one". TS 008 in turn calls out a document named Telecommunications Labeling (Customer Equipment and Customer Cabling) that cables also must meet. Technical Staff Senior EMC Engineer William Morse NCE -----Original Message----- From: Alex McNeil [mailto:alex.mcn...@ingenicofortronic.com] Sent: Friday, May 17, 2002 12:54 AM To: 'emc-p...@majordomo.ieee.org' Subject: Australian TS001 now part of AUS/NZ60950? Hi Group, If I get the product, with an internal analogue modem or ISDN, approved to AUS/NZ60950 does this mean I no longer need to get Safety Approved to TS001? Kind Regards Alex McNeil Principal Engineer Tel: +44 (0)131 479 8375 Fax: +44 (0)131 479 8321 email: alex.mcn...@ingenicofortronic.com -----Original Message----- From: Kevin Richardson [mailto:k...@compuserve.com] Sent: Wednesday, April 10, 2002 12:02 PM To: oover...@lexmark.com; emc-p...@majordomo.ieee.org Subject: RE: Adoption of IEC-60950 3rd Ed. Oscar, AS/NZS 60950:2000 (IEC 60950 3rd Edition) was published as the joint Australian / New Zealand standard. As you can see, it was published in 2000. Australian and New Zealand are in the balloting process for the adoption of IEC 60950-1 and it should be published around mid year (Jun/Jul 2002). It will be published as AS/NZS 60950-1:2002. Best regards, Kevin Richardson Stanimore Pty Limited Compliance Advice & Solutions for Technology (including Australian Agent Services) (Legislation/Regulations/Standards) Ph: 02-4329-4070 (Int'l: +61-2-4329-4070) Fax: 02-4328-5639 (Int'l: +61-2-4328-5639) Mobile: 04-1224-1620 (Int'l: +61-4-1224-1620) Email: kevin.richard...@ieee.org The material transmitted in this message and contained in any attachments to this message is confidential and/or privileged information and is intended only for the addressee/s. Any unauthorised use of or reliance upon this material by persons or entities other than the addressee/s is prohibited. If you receive this information in error, please notify the sender and destroy any copies of the material immediately. -----Original Message----- From: owner-emc-p...@majordomo.ieee.org [mailto:owner-emc-p...@majordomo.ieee.org]On Behalf Of oover...@lexmark.com Sent: Friday, 5 April 2002 2:16 AM To: emc-p...@majordomo.ieee.org Subject: Adoption of IEC-60950 3rd Ed. Group, What is the adoption status for Greece, Israel, India and New Zealand with regards to IEC 60950, 3rd Edition? Thanx. Oscar ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list" ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list" ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list" ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
