Can anybody advise as to what dwell time should be used for an average detector when measuring a broadband noise source? This time obviously increases the total test time unnecessarily if set too high and reduces the measurement accuracy if set too low. Thanks Ian Gordon
********************************************************************* This footnote confirms that this e-mail message has been scanned for the presence of known computer viruses by the MessageLabs Virus Control Centre. However, it is still recommended that you use local virus scanning software to monitor for the presence of viruses. ********************************************************************* ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
