I need to test a proprietary LAN port to the standard, and I have lot's of questions. The port connects to an unscreened and balanced cable.
* What data speed LAN have you tested that uses unscreened and balanced cable? * Did you use alternative method 1 or 2? * If alternative 1, how did you demonstrate that the emission limits will not be exceeded for the type of LAN cable specified in the user documents? * For alternative 2, the standard references category 3 and 5 telecom cables. Do these cables apply to LANs? If so, can someone give me an idea of what consitutes a category 3 or 5 cable? * Were you able to use an ISN and obtain normal operation? * If you used an ISN, where did you obtain it? Richard Woods Sensormatic Electronics Tyco International ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"