A microprocessor is driven by a 12MHz clock. The 5V Vcc-pin is decoupled by a 100nF capacitor with a few mm leads. We can observe an unwanted 156MHz signal on the 5V line, maybe 13th harmonic of 12MHz. We will try to suppress/decouple this 156MHz signal.
Suggestion: Insert a SMD ceramic capacitor of value 820pF in parallel with the existing 100nF. The reason for the low value 820pF is because the capacitor self-resonance frequency is approximate 180MHz, and I believe it is important to choose a Cap value with a resonance frequency higher than the frequency we would like to decouple. Does it make sense? Best regards Amund Westin, Oslo/Norway ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"