Et Al: I am soliciting opinions from anyone who has attempted using an antenna carousel that aids in doing automated EMI measurements under CISPR 25.
The CISPR 25 specification provides requirements in terms of spacings of the antenna elements from the walls of the room, size of the room, use of anechoic material, etc but not pertaining to adjacent antennas. In addition, certain automotive companies place further requirements in terms of expected performance relative to Round Robin results of a Test Artifact taken at several labs before allowing a new lab to be listed as AEMCLRP accredited. I look forward to hearing from those involved in the Automotive Industry who have information either good/bad relating to this issue. Regards, Jeffrey W. Greilich ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"