Dear Ann Landers, I've always had trouble with peripherals. Keyboards and mice that were CE marked and looked like such good prospects have mostly turned out to be fickle.
Well, I've been involved with a touchpad for about five months now. When I first bought it, we were so happy. Whenever we were together it, it could read my mind. A tap of my finger and it knew just what to do. And then this ESD gun comes along. One zap and BOOM! The touchpad turns its back on me. It won't respond at all! I tried talking to it...but it just gave me the cold shoulder. I suggested counseling...still no response. I threatend to go and get a mouse...no response. Well, I finally had to just take a deep breath and go through with it. I cycled power. Well it now responds to me... but I don't know if I'll ever trust it around an ESD gun again. I don't know if our relationship will ever be the same. Signed "Out of touch in New York" OK OK The real question is... does anybody have some words of advice regarding touchpads. I am testing a unit which consists of a keyboard/touchpad combination. The touchpad is approx 1.5" x 1.5" and is able to sense a sliding or tapping finger. The touchpad is used to perform all of the functions that a mouse typically performs. I am assuming that it has some sort of capacitive sense circuit which can tell when your finger slides across the pad or taps on the pad. I have one that gets all out of whack with 8KV ESD. i.e. the touchpad becomes unresponsive and it stops software execution in our host system. Unfortunately, this is one of those instances where we don't build the keyboard/touchpad; so my bag of fix tricks is limited. Probably limited to seeing if another manufacturer produces a keyboard/touchpad with better performance. Or, am I slamming my head against the wall on this one? The keyboard/touchpad is already CE marked by its manufacturer. Is this typical? Are all touchpads (even CE marked ones) ESD sensitive? Do I just live with it? Am I over-testing this touchpad? Overall... I have had REALLY bad experiences with CE marked keyboards and mouses. Now I have trouble with our first touchpad. We typically use a capacitive filter on our inputs and we typically put a ferrite on the cable...yet still trouble. Is this typical of what others see? Any words of advice, experience... would be appreciated. Chris Maxwell | Design Engineer - Optical Division email chris.maxw...@nettest.com | dir +1 315 266 5128 | fax +1 315 797 8024 NetTest | 6 Rhoads Drive, Utica, NY 13502 | USA web www.nettest.com | tel +1 315 797 4449 | ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: pstc_ad...@garretson.org Dave Heald davehe...@mediaone.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server.