There is a voluntary standard that has been developed in Sweden by
Statskontoret.  The standard is based on the measurement methods of ISO7779.
The latest version of this standard was issued early this year - link is 
http://www.statskontoret.se/projekt/standardisering/TN26.pdf

Lyle Luttrell, PE
PeAk Storage Solutions, a Division of MaxOptix
246 South Taylor Avenue
Louisville, CO 80027



-----Original Message-----
From: richwo...@tycoint.com [mailto:richwo...@tycoint.com]
Sent: Wednesday, September 18, 2002 6:26 AM
To: emc-p...@majordomo.ieee.org
Subject: RE: Acousic Noise from ITE



According to a well known German safety agency, there are no normative EU or
German national acoustic limits for ITE. The 3rd GS Ordinance on product
safety includes the requirements of the LVD and Machinery Directive, but the
requirement for acoustic noise is understood to apply only to machinery.
Even then, the requirment is to document the level in the manual, and no
maximum levels are specified. There are German ocupational regulations that
apply to the workplace environment, but those limits are for the work
locations where the noise can originate at many sources.

Does anyone else any input on ITE?

Richard Woods
Sensormatic Electronics
Tyco International

-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/

To cancel your subscription, send mail to:
     majord...@ieee.org
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Ron Pickard:              emc-p...@hypercom.com
     Dave Heald:               davehe...@attbi.com

For policy questions, send mail to:
     Richard Nute:           ri...@ieee.org
     Jim Bacher:             j.bac...@ieee.org

All emc-pstc postings are archived and searchable on the web at:
    http://ieeepstc.mindcruiser.com/
    Click on "browse" and then "emc-pstc mailing list"

-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/

To cancel your subscription, send mail to:
     majord...@ieee.org
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Ron Pickard:              emc-p...@hypercom.com
     Dave Heald:               davehe...@attbi.com

For policy questions, send mail to:
     Richard Nute:           ri...@ieee.org
     Jim Bacher:             j.bac...@ieee.org

All emc-pstc postings are archived and searchable on the web at:
    http://ieeepstc.mindcruiser.com/
    Click on "browse" and then "emc-pstc mailing list"

Reply via email to