UL has 2 standards which pertain to power cables.  UL 817 and UL 1072

Warren Birmingham
Epsilon-Mu Consultants

On Monday, Sep 16, 2002, at 09:32 US/Pacific, <rbus...@es.com> wrote:


I have been tasked with finding a standard and test procedure to validate the reliability of flexible cables over time. I have found a standard, EIA TP-41C (EIS-364-41C), but it focuses primarily on the electrical connectors rather than the cable. Another standard Mil-C-13777G is used by some of the wire and cable manufacturers, but searching the web I found a US Government site that indicated that this standard was "inactive for new design". I can find no source for this standard. My application is for signal cables, but I assume other power cables would have some type of standard which they are tested > to.

Are there other standards applicable to cables in a flex environment? Any help would be appreciated.

Rick Busche
Evans & Sutherland
SLC, Utah
rbus...@es.com
(801) 588-7185

-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/

To cancel your subscription, send mail to:
     majord...@ieee.org
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Ron Pickard:              emc-p...@hypercom.com
     Dave Heald:               davehe...@attbi.com

For policy questions, send mail to:
     Richard Nute:           ri...@ieee.org
     Jim Bacher:             j.bac...@ieee.org

All emc-pstc postings are archived and searchable on the web at:
    http://ieeepstc.mindcruiser.com/
    Click on "browse" and then "emc-pstc mailing list"



-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/

To cancel your subscription, send mail to:
    majord...@ieee.org
with the single line:
    unsubscribe emc-pstc

For help, send mail to the list administrators:
    Ron Pickard:              emc-p...@hypercom.com
    Dave Heald:               davehe...@attbi.com

For policy questions, send mail to:
    Richard Nute:           ri...@ieee.org
    Jim Bacher:             j.bac...@ieee.org

All emc-pstc postings are archived and searchable on the web at:
   http://ieeepstc.mindcruiser.com/
   Click on "browse" and then "emc-pstc mailing list"

Reply via email to