When you consider the cost of reports I think the cost goes up from
$4500. Two of the labs I use, cost runs about $5000 for the immunity
testing only plus cost of reports, give or take a few nickels.....
Warren
On Monday, Sep 23, 2002, at 19:30 US/Pacific, lfresea...@aol.com wrote:
> In a message dated 9/23/02 9:05:08 PM Central Daylight Time,
> war...@comfortjets.com writes:
>
>
> A suite of testing runs about $6000 for immunity for ITE equipment to
> meet EN 55 024 without even talking about the Radiated Immunity
> requirements equipment and a chamber. You are going to likely have to
> do this subset of testing anyway if you want a credible report as
> evidence of self-declaration. The costs of emissions and immunity
> testing with reports is around $7000 and is a clean approach both
> financially and in timeline if you do some chamber tests first for
> emissions, say a 2-hour scan in a chamber. Emissions and immunity
> testing are somewhat coupled in that a device that is a low radiator is
> also likely to have good resistance to susceptibility, but not always.
> This is most often true of metal shielded enclosures and those with
> shielded I/O cables.
>
>
>
> Hi Warren,
>
> I think your test costs seem a little high, I won't say what I charge
> for fear of being accused of commercialism. But a number of labs, good
> labs, will charge under $4,500 for a full set of tests....
>
> There is a good deal of new equipment coming out from vendors too,
> which may mean a flood of used, but still good equipment. E-bay is a
> source for this.
>
> Cheers,
>
> Derek Walton
> L F Research
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
majord...@ieee.org
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Ron Pickard: emc-p...@hypercom.com
Dave Heald: davehe...@attbi.com
For policy questions, send mail to:
Richard Nute: ri...@ieee.org
Jim Bacher: j.bac...@ieee.org
All emc-pstc postings are archived and searchable on the web at:
http://ieeepstc.mindcruiser.com/
Click on "browse" and then "emc-pstc mailing list"
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
majord...@ieee.org
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Ron Pickard: emc-p...@hypercom.com
Dave Heald: davehe...@attbi.com
For policy questions, send mail to:
Richard Nute: ri...@ieee.org
Jim Bacher: j.bac...@ieee.org
All emc-pstc postings are archived and searchable on the web at:
http://ieeepstc.mindcruiser.com/
Click on "browse" and then "emc-pstc mailing list"