Can anyone shed any light on if this standard is usually used in association with EN 61000-3-11 and indeed if the -12 is even published. The IEC have it listed as CDV. Thank you.
Best regards, Kevin Richardson Stanimore Pty Limited Compliance Advice & Solutions for Technology (including Australian Agent Services) (Legislation/Regulations/Standards) Ph: 02-4329-4070 (Int'l: +61-2-4329-4070) Fax: 02-4328-5639 (Int'l: +61-2-4328-5639) Mobile: 04-1224-1620 (Int'l: +61-4-1224-1620) Email: kevin.richard...@ieee.org This material (this message and the information contained in all attachments to this message) is confidential and/or privileged information and is intended only for the addressee/s named above. Any unauthorised dissemination, copying, use of or reliance upon this material by persons or entities other than the addressee/s named above is prohibited. If you receive this material in error, please notify Stanimore Pty Limited and destroy all copies (electronic and hardcopy) of this message and all attachments immediately. ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"