My apologies! In the last message I put a wrong address: ....maHordomo.. and of course the message got rejected - there just ain't no AI in my address book!
Gabi: You will have read some more on the subject, so best of good luck to you! Bogdan. bogdan matoga wrote: > Gabi: > I believe that there is a basic rule which is not published anywhere: > when you design something, then do it right. > When transient suppressors are needed, then use the correct component, > which will not depend on Paschen's Law and give predictable performance. > > Same for "necked down" fuses. > When you want performance, then do it right. The above original > suggestions are perfect for Mickey-Mouse-engineering. > Bogdan. ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@mediaone.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"