The following explanation can be found in "Frequently Asked Questions (FAQ)
about the RTTE Directive (1999/5/EC) Prepared by the ERC WG RR (version 27
January 2000)":

Notification under Article 6.4 is required for radio equipment covered by
the following definition:
Radio equipment which uses frequency bands whose use is not harmonised
throughout the Community. This is considered to be all radio equipment
except those:
·     which can only transmit under the control of a network; or
·     which use a frequency band which is allocated to the same radio
interface in every Member State in the following way:
a)    there is a common frequency allocation; and
b)    within this allocation, the allotment and/or assignment of radio
frequencies or radio frequency channels follows a common plan or
arrangement; and
c)    the equipment satisfies common parameters (e.g. frequency, power,
duty cycle, bandwidth, etc.); or
·     which do not transmit.

John Radomski
Schneider Electric (Modicon)





richwo...@tycoint.com@majordomo.ieee.org on 10/15/2002 01:09:11 PM

Please respond to richwo...@tycoint.com

Sent by:    owner-emc-p...@majordomo.ieee.org


To:    emc-p...@majordomo.ieee.org
cc:

Subject:    RE: RTTE - receive only equipment



Good question Amund. I found nothing in the Directive that provides a clear
direction. I think that sound of silence from the rest of the group means
that no one knows the answer. I checked the UK's notification form and
there
is only one place where they ask about the receiver:

"Duplex direction (if applicable)
This should state simplex, ½ duplex or duplex operation. If duplex please
quote, where applicable, transmit and receive frequencies and/or duplex
split."

It's a mystery.

Richard Woods
Sensormatic Electronics
Tyco International


-----Original Message-----
From: am...@westin-emission.no [mailto:am...@westin-emission.no]
Sent: Monday, October 14, 2002 8:43 AM
To: emc-p...@majordomo.ieee.org
Subject: RTTE - receive only equipment



As far as I understand the RTTED, the directive also applies to radio
receive-only equipment. But are we required to notify it for each member
state within EU, if it use non-harmonized frequency bands ?

Best regards
Amund Westin, Oslo / Norway




-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/

To cancel your subscription, send mail to:
     majord...@ieee.org
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Ron Pickard:              emc-p...@hypercom.com
     Dave Heald:               davehe...@attbi.com

For policy questions, send mail to:
     Richard Nute:           ri...@ieee.org
     Jim Bacher:             j.bac...@ieee.org

All emc-pstc postings are archived and searchable on the web at:
    http://ieeepstc.mindcruiser.com/
    Click on "browse" and then "emc-pstc mailing list"
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/

To cancel your subscription, send mail to:
     majord...@ieee.org
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Ron Pickard:              emc-p...@hypercom.com
     Dave Heald:               davehe...@attbi.com

For policy questions, send mail to:
     Richard Nute:           ri...@ieee.org
     Jim Bacher:             j.bac...@ieee.org

All emc-pstc postings are archived and searchable on the web at:
    http://ieeepstc.mindcruiser.com/
    Click on "browse" and then "emc-pstc mailing list"




-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/

To cancel your subscription, send mail to:
     majord...@ieee.org
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Ron Pickard:              emc-p...@hypercom.com
     Dave Heald:               davehe...@attbi.com

For policy questions, send mail to:
     Richard Nute:           ri...@ieee.org
     Jim Bacher:             j.bac...@ieee.org

All emc-pstc postings are archived and searchable on the web at:
    http://ieeepstc.mindcruiser.com/
    Click on "browse" and then "emc-pstc mailing list"

Reply via email to