Greetings all, I need to locate a resource for High Voltage Triax cable. It should be rated to 2000V AC/DC on both the center conductor and the 1st shield. The 2nd shield will be grounded and then an overall jacket. In addition it needs to be rated for 160 Amps continuous.
It would be best if there is something out there that is listed by UL or CSA but I can entertain other possibilities. Best regards, -doug Douglas E. Powell Compliance Engineer Advanced Energy Industries, Inc. Fort Collins, CO 80535 USA _______________________________________________________________ This message, including any attachments, may contain information that is confidential and proprietary information of Advanced Energy Industries, Inc. The dissemination, distribution, use or copying of this message or any of its attachments is strictly prohibited without the express written consent of Advanced Energy Industries, Inc. ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"