does anyone know about: RRL a standard/requirement in south korea? what equipment must comply to it? thank you, Richard,
-----Original Message----- From: richwo...@tycoint.com [mailto:richwo...@tycoint.com] Sent: Friday, August 30, 2002 12:14 PM To: emc-p...@majordomo.ieee.org Subject: RE: Telephone headsets Chris, the CE marking indicates that the product complies with all applicable directives. The only two directives that might apply is the LV and EMC directives. However, the LVD does not apply since the working voltages are low. The EMC directive would apply if your equipment is likely to cause interference or likely to be susceptable to interference. I tend to believe that your equipment is not likely to cause interference, but it might be susceptable to magnetic fields. So some immunity requirements may apply. If so, your Declaration of Conformity would only claim compliance with the EMC Directive. If the EMC Directive does not apply, then no Declaration or CE marking is required. Richard Woods Sensormatic Electronics Tyco International -----Original Message----- From: Chris K. Poore [mailto:chr...@percept.com] Sent: Friday, August 30, 2002 10:02 AM To: EMC-PSTC Subject: Telephone headsets We have some telephone headsets that we want to CE Mark, but are not sure what safety standard to use. Additionally, I don't see any category under the CE Marking directive that would be entirely applicable. The LVD seems most logical, except that the input voltage to the headsets is well below the 75DC, 50AC cutoff. The headsets will connect to an OEM audio amplifier that has been evaluated to the LVD, and seems to contain all the necessary isolation (we are not even selling the amplifier). The primary reason for wanting to CE Mark is because a competitor is doing it. Is there a safety standard that we should use that is specific to these telephone headsets for EU compliance? Thanks, Chris K. Poore Staff Compliance Engineer --------------------------------- Percept Technology Labs, Inc. 4735 Walnut #E Boulder, CO 80301 303-444-7480 ext. 113 303-444-1565 Fax mailto:chr...@percept.com http://www.percept.com ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list" ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list" ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
