Safety Folks - I have a question for the group on the effects of temperature rating and deterioration. If a pcb is rated X degrees C, and the sizing of the power traces on an inner layer is such that the pcb temperature is now (X-1) degrees C,
What effect does this have on the longevity of the pcb? At what %of the temperature board rating X will discoloration occur? I would appreciate all comments, so please fee free to respond to the group or to me directly. Thanks. Regards, Mark F. Gill, PE Sr. Engineer C-MAC Design Corporation, A Solectron Company 4222 Emperor Blvd, Suite 300 RTP, NC 27703 P: (919)-474-3569 markg...@solectron.com ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
