Hello group, I am currently considering the possibility of setting up a Supervised Manufacturer Testing (SMT) Lab at my company. This is an entirely new area for me. I would appreciate any comments online or offline as to what experience folks have had with this type of program, positive or negative recommendations or comments, whats good about it, what to watch out for, etc. The type equipment to be evaluated is limited to ITE.
Thanks in advance, George Stults Compliance Engineer WatchGuard Technologies Inc. ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"