Hello news group readers, MANY thanks for your replies on my question. The general advice was to place the PC outside the anechoic room. And to try to test with a constant communication for reproducibly. A second point was that David Sterner has advised a test set-up for the ethernet in operational mode.
Best Regards, Jan Mobers Quality / Approbation Engineer Philips CSI (Communication Security & Imaging) Building SX-030 P.O. Box 80002 5600 JB Eindhoven, The Netherlands Phone: +31 40 27 38862 / Fax: +31 40 27 38146 E-mail: jan.mob...@philips.com ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"