This term means the ratio :

(signal+noise+distortion) / (noise+distortion)

A measure of difference between wanted signal+inherent noise and  distortion
(always present)and unwanted noise and distortion

Regards

Mark Render
EMC and Radio Group  Manager
KTL
Saxon Way
Priory Park West
Hessle
East Yorkshire
HU13 9PB

E-mail: mren...@ktl.com

Tel: +44 (0) 1482 801801
Fax: +44 (0) 1482 801806

This e-mail and any files transmitted with it are confidential and intended
solely for the use of the individual or entity to whom they are addressed.
If you have received this e-mail in error please do not read the contents.
You should notify the sender immediately and delete the original e-mail.

KTL is the trading name of Kingston Laboratories Limited

Registered office:
37 Carr Lane
Kingston upon Hull
HU1 3RE

Reg. No. 3263196




-----Original Message-----
From: richwo...@tycoint.com [mailto:richwo...@tycoint.com]
Sent: 21 March 2002 15:29
To: emc-p...@majordomo.ieee.org
Subject: SND/ND ratio



The term "SND/ND ratio" is used in ETSI EN 300 220-1 as one of the
performance criteria for receivers. Can someone tell me what this term
means?

Richard Woods
Sensormatic Electronics
Tyco International


-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/

To cancel your subscription, send mail to:
     majord...@ieee.org
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Ron Pickard:              emc-p...@hypercom.com
     Dave Heald:               davehe...@mediaone.net

For policy questions, send mail to:
     Richard Nute:           ri...@ieee.org
     Jim Bacher:             j.bac...@ieee.org

All emc-pstc postings are archived and searchable on the web at:
    http://ieeepstc.mindcruiser.com/
    Click on "browse" and then "emc-pstc mailing list"

-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/

To cancel your subscription, send mail to:
     majord...@ieee.org
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Ron Pickard:              emc-p...@hypercom.com
     Dave Heald:               davehe...@mediaone.net

For policy questions, send mail to:
     Richard Nute:           ri...@ieee.org
     Jim Bacher:             j.bac...@ieee.org

All emc-pstc postings are archived and searchable on the web at:
    http://ieeepstc.mindcruiser.com/
    Click on "browse" and then "emc-pstc mailing list"

Reply via email to