Russell (r....@totalise.co.uk) wrote: >> I'm looking at an ambient scan starting at 32dBuV/m @ 30MHz, dropping to 18dBuV/m @ 70MHz then gradually (with small peaks and troughs) rising to 41dBuV/m @ 1GHz. <<
Russell, Are you sure these are room ambients? They might be the analyzer noise floor. Generally, a decent room will not admit signals high enough to be seen above the instrument noise floor. Even a poorly built one should attenuate 60 dB or better and only show a few, discrete ambients from nearby, high-power sources. Cortland ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@mediaone.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
