Hi David:
> You probably already know this, but don't forget that the product will need
> to pass temp tests during abnormals i.e., blocked vents.
I'm not sure if "pass temp tests" means compliance with
the heating requirements or the abnormal requirements,
so I offer this clarification.
Under abnormal conditions (blocked vents), there are no
temperature limits per se. According to Sub-clause 5.4.1,
under abnormal conditions the unit must remain safe.
Best regards,
Rich
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
majord...@ieee.org
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Ron Pickard: emc-p...@hypercom.com
Dave Heald: davehe...@mediaone.net
For policy questions, send mail to:
Richard Nute: ri...@ieee.org
Jim Bacher: j.bac...@ieee.org
All emc-pstc postings are archived and searchable on the web at:
http://ieeepstc.mindcruiser.com/
Click on "browse" and then "emc-pstc mailing list"
