The scenario you describe is specifically addressed by the standard, IEC60825-1.
Regards, Peter L. Tarver, PE Product Safety Manager Sanmina-SCI Homologation Services San Jose, CA peter.tar...@sanmina-sci.com > -----Original Message----- > From: Collins, Jeffrey > Sent: Friday, June 28, 2002 1:45 AM > > Group, > > And yet another laser question. How would one > certify/classify Optical Gear > in "Europe Only" where the transceiver may very > well be a class 1 laser, but > because you multiplex multiple channels before > launching on the line coming > out of the CO, your aggregate power can be > significantly higher than class > 1? > > > Jeffrey Collins ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"