John, the ENs that you will use will depend upon the intended application.
For emissions, EN 55022 applies for ITE applications, EN55103-1 for
professional use and there may be other standards for other applications
such as instrumentation and process control. There are at least two immunity
standards: EN50130-4 for surveliance/alarm system applications and EN
55103-2 for professional use.

Richard Woods
Sensormatic Electronics
Tyco International


-----Original Message-----
From: John Coyle [mailto:jco...@silent-witness.com]
Sent: Monday, June 17, 2002 7:42 PM
To: emc-p...@majordomo.ieee.org
Subject: Network Camera and EMC?



Hello,

I am developing a network camera that will connect directly to a 10/100
BaseT network.

I intend to sell in both US and Europe.

Which standards apply for regulatory approval?
My particular concern is EMC.

All comments would be appreciated.

Thanks

John Coyle
Senior Engineer,
Silent Witness.
Tel: 604-574-1526  Ext 8633
Email: jco...@silent-witness.com


-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/

To cancel your subscription, send mail to:
     majord...@ieee.org
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Ron Pickard:              emc-p...@hypercom.com
     Dave Heald:               davehe...@attbi.com

For policy questions, send mail to:
     Richard Nute:           ri...@ieee.org
     Jim Bacher:             j.bac...@ieee.org

All emc-pstc postings are archived and searchable on the web at:
    http://ieeepstc.mindcruiser.com/
    Click on "browse" and then "emc-pstc mailing list"

-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/

To cancel your subscription, send mail to:
     majord...@ieee.org
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Ron Pickard:              emc-p...@hypercom.com
     Dave Heald:               davehe...@attbi.com

For policy questions, send mail to:
     Richard Nute:           ri...@ieee.org
     Jim Bacher:             j.bac...@ieee.org

All emc-pstc postings are archived and searchable on the web at:
    http://ieeepstc.mindcruiser.com/
    Click on "browse" and then "emc-pstc mailing list"

Reply via email to