Ian,

Up to 1/4/2004 both standards - EN61010-1:1993 and EN61010-1:2001 - can be
used for presumption of conformity to the essential requirements of the LVD.
>From 1/4/2004 , EN61010-1:2001 is the only standard that must be used to
show compliance for products that are still put on the EU market from that
date.
Regards,
Kris


From: Gordon,Ian [mailto:ian.gor...@edwards.boc.com]
Sent: maandag 6 januari 2003 11:57
To: 'IEEE EMC-PSTC GROUP'
Cc: 'Peters, Michael'
Subject: DOCOPOCOSS?



All
In the link supplied below by Peter my concern is with EN61010-1.
Will EN61010-1:1993 replace EN61010-1:1990 on 1/4/04?
Does the table show that after 1/4/04 the 2001 version must be used?
May both the 1993 and 2001 versions be used concurrently after 1/4/04?

By the way, are the dates quoted in the OJ dd/mm/yy or mm/dd/yy?

LVD: Commission communication in the framework of the implementation of
Council Directive 73/23/EEC
- OJ C 317 of 2002-12-18
(this list replaces all the previous lists published in the Official
Journal of the European Communities)
http://europa.eu.int/eur-lex/en/oj/2002/c_31720021218en.html


Thanks
Ian Gordon

_____________________________________________________________________
This e-mail has been scanned for viruses by the WorldCom Internet Managed
Scanning Service - powered by MessageLabs. For further information visit
http://www.worldcom.com


This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/

To cancel your subscription, send mail to:
     majord...@ieee.org
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Ron Pickard:              emc-p...@hypercom.com
     Dave Heald:               davehe...@attbi.com

For policy questions, send mail to:
     Richard Nute:           ri...@ieee.org
     Jim Bacher:             j.bac...@ieee.org

All emc-pstc postings are archived and searchable on the web at:
    http://ieeepstc.mindcruiser.com/
    Click on "browse" and then "emc-pstc mailing list"


This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/

To cancel your subscription, send mail to:
     majord...@ieee.org
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Ron Pickard:              emc-p...@hypercom.com
     Dave Heald:               davehe...@attbi.com

For policy questions, send mail to:
     Richard Nute:           ri...@ieee.org
     Jim Bacher:             j.bac...@ieee.org

All emc-pstc postings are archived and searchable on the web at:
    http://ieeepstc.mindcruiser.com/
    Click on "browse" and then "emc-pstc mailing list"

Reply via email to