Hi All, Previously, end of line testing on PSTN critical parameters were a must to meet the Approvals bodies requirement i.e. before you could attach the BABT Approvals (UK) label. Q1. Since deregulation i.e. introduction of the R&TTED I would assume that this is no longer required? Q2. I would still do the Dielectric Withstand test for safety and a few audit PSTN (TBR21) tests per a batch of products. Any comments? Q3. What about TIA/EIA/IS-968 and CS-03, are end of line tests required? Q4. Any country require end of line tests for PSTN?
Thanks in advance for all comments received. Kind Regards Alex McNeil Principal Engineer Tel: +44 (0)131 479 8375 Fax: +44 (0)131 479 8321 email: alex.mcn...@ingenicofortronic.com This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc