My last company subscribed to BSI http://bsonline.techindex.co.uk/ which allowed all employees to view most IEC, ISO, CENELEC standards. It worked very well. I don't think that it would be cheap though.
Luke Turnbull >>> "Cheng-Wee Lai" <chengwee_...@emclab2000.com> 02/08/03 12:24am >>> All, I know this might be a very stupid question to ask, but is there a place where I can pay a flat subscription fee and able to read all these new standard (e.g. all these IEC, EN, ISO, ANSI, UL, AU/NZ etc), so I don't need to worry about collecting all the up to date standard. Cause by the time I get the whole set, I find myself ready to redo the collecting cycle again because there are new edition coming. Cheng-Wee Lai This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
