Hi, If a manufacturer is required to put information on the label of his product, it must be in a language that is acceptable for the user in the country where the product is put on the market.
If the above product consists of a certain part that can be replaced during service operations locally and there are special precautions to be taken care of when replacements takes place, should the label on that part also be in the language of the country where the final product is marketed. An example could be a CRT of a VDU that needs replacement by exactly the same type. Regards, Andre _________________________________________________________________ This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc