Why not blast the DUT with 10V/m at all frequencies? If it misbehaves in the 3V/m bands then 3V/m could be tried. If you want some high E-field try my house (or another ham's house). I often run fields to the FCC safety limit in my house. When operating 160 meters I can light a 40 watt fluorescent tube by holding it in my hand at the operating position. I believe the peak limit at 1.8 MHz is 500 V/m. The equipment in my house is not affected (well just a little) with the application of a few ferrites and filters. The field in the adjacent neighbors homes is in the tens of volts/m. No complaints yet. Just remember, in words of N6SU "if you can't see it it can't hurt you".
Dave Cuthbert WX7G Micron Technology This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc