Rick, ISDN equipment complying CTR3/TBR3 or CTR4/TBR4 should have no problem operating in Australia.
Addition testing however would be required for Australia. Probable standards would be: - ACA TS001:1997 (requires compliance with AS/NZS 3260:1993 plus A1, A2, A3 & A4) - AS/ACIF S004:2001 (if device is ISDN incorporates voice) - AS/ACIF S031:2001 for BRI - AS/ACIF S038:2001 for PRI Best regards, Kevin Richardson Stanimore Pty Limited Compliance Solutions for Technology Products (Legislation/Regulations/Standards/Australian Agent Services) Ph: 02-4329-4070 (Int'l: +61-2-4329-4070) Fax: 02-4328-5639 (Int'l: +61-2-4328-5639) Mobile: 04-1224-1620 (Int'l: +61-4-1224-1620) Email: kevin.richard...@ieee.org This material (this message and the information contained in all attachments to this message) is confidential and/or privileged information and is intended only for the addressee/s named above. Any unauthorised dissemination, copying, use of or reliance upon this material by persons or entities other than the addressee/s named above is prohibited. If you receive this material in error, please notify Stanimore Pty Limited and destroy all copies (electronic and hardcopy) of this message and all attachments immediately. From: owner-emc-p...@majordomo.ieee.org [mailto:owner-emc-p...@majordomo.ieee.org]On Behalf Of rlinf...@sonicwall.com Sent: Thursday, 21 August 2003 2:44 AM To: emc-p...@majordomo.ieee.org Subject: Will European ISDN devices work in Australia or New Zealand Hello EMC-PSTC GROUP, Will ISDN products that comply to the European standards and work in Europe, meet the Australian standards and work in Australia? (Telecom and Safety) What about New Zealand? Thanks in advance. Rick Linford This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: emc_p...@symbol.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: emc_p...@symbol.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc