You need to consult ERC Recommendation 70-03 which lists the frequency restrictions for SRDs. See annex 9 for inductive loop devices. You can obtain the document with this link: http://www.ero.dk/doc98/official/pdf/rec7003e.pdf
Richard Woods Sensormatic Electronics Tyco International From: Pierre Selva [mailto:e.l...@wanadoo.fr] Sent: Friday, August 01, 2003 10:12 AM To: Forum Safety-emc (Forum Safety-emc) Subject: SRD - Inductive product - European limitations ? Hello all, Does somebody know if there is restriction for use of an SRD system (inductive loop for anti theth system) in European countries. This product can be used in the following frequency range : 6.765 - 6.795 MHz 7.400 - 8.800 MHz 13.553 - 13.567 MHz. They are compliant with EN300330 standard requirements. Following a brief search on some web sites, it seems to me that most of the countries accept these kind of products without licensing, but I would like to be sure that all of them are sharing this position. Many thanks for you inputs, Best regards, Pierre eLABs (emc, safety, radio, eco-design - product regulations) 1 rue des Essarts 38610 GIERES - FRANCE Pierre SELVA Phone : 33 (0)4 38 370 007 Gérant Fax : 33 (0)4 38 371 004 e-mail : <mailto:pierre.se...@e-labs.fr> pierre.se...@e-labs.fr <http://www.e-labs.fr/> www.e-labs.fr This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: emc_p...@symbol.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: emc_p...@symbol.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
